WHEEL LOADER LKP-0804 ENG
WHEEL LOADER LKP-0804
Destination
Wheel loader LKP-0804 is destined to work at loading and transportation of output on close
distances in underground, not methane mines metal ores and mineral raw. Machine is admitted to
moving in excavations about longitudinal inclination to 15° and to transverse inclination to 8°.
TECHNICAL DATA
| Length: | |
| − Bucket rest on the ground | 9 830 mm |
| − Bucket in transport position | 9 450 mm |
| Width: | |
| − Over tires | 2 650 mm |
| − Over bucket | 3 010 mm |
| Height | 2 050 mm |
| Operating weight | 20 500 kg |
| Disposition of operating weight (without loading): | |
| − For front axle | 9 550 kg |
| − For rear axle | 10 750 kg |
| Disposition of operating weight with nominal loading: | |
| − For front axle | 22 600 kg |
| − For rear axle | 5 700 kg |
| Nominal bucket capacity | 3,5 m3 |
| Tramming capacity | 80 kN |
| Break out force | 137,5 kN |
| Max unloading height by dumping angle 45° | 1 350 mm |
| Range unloading by dumping angle 45° | 1 630 mm |
| Depth loosening of rock | 630 mm |
| Max angle unloading bucket | 45° |
| Hill climbing ability | 20% |
| Angle of tilt rear axle | ±11° |
| Hill climbing angle | 15° |
| Turn angle | 42° |
| Axle base | 3 650 mm |
| Wheel base | 2 050 mm |
| Clearance | 350 mm |
| Inner turning radius | 3 460 mm |
| Outer turning radius | 6 790 mm |
SPECIFIACTION
| Engine | |
| − Type | SW 680/73 WSK "PZL-Mielec" |
| Torque converter | |
| − Type | C-5000 Clark |
| Transmission | |
| − Type | R-28000 Clark |
| − Sort | 3-gears |
| Driving axle front / rear | |
| − Type | 450-03-0000 (FON Radomsko) disk brake with clamps GOODRICH |
| Service brake | pneumatic-hydraulic |
| Tyres | |
| − Size | 23,5 R25 |
| Cab | |
| − Sort | closed construction "capsule" |
| − Control desk | with legible monitors of loader and with
signal lamps |
| Working unit | |
| − Kinematics | with unloading independence of lifting
boom |
| − Standard bucket (SAE) | 3,5 m 3 |
| − Central lubrication system | LINCOLN |
| Hydraulic installation | |
| − Hydraulic system | with working and turning circuits |
| Electrical installation | |
| − voltage | 24V underground version |
| − accumulators | 2 pcs. 165 Ah / 12 V |
| Additional equipment road signs + stand , extinguisher |
Optional:
It is possible using components (checked in exploitation conditions) other producers in according to
individual requirements of receiver.
Назад в раздел